PRICE
The choice of the technological scheme
Our experts will help to choose the technological scheme of crushing and sorting of construction waste.
The processing lines should be “flexible”, to enable by changing the mode of operation to provide high quality of crushed stone with minimal capital costs and operating costs.
The defining parameters are set by the customer. These are mainly the characteristics of the source material, loading capacity, the nature of the final product.
Our designers will develop a quantitative and qualitative technological scheme and carry out the selection of equipment.
It is very important to determine the characteristics of the raw materials.
Characteristics of the source material
The answers to all these questions will prompt our specialists models and sizes of loading, crushing, sorting and transportation units.
The bulk of construction waste should be taken:
- in the development of concrete structures -2.4 t/m3;
- in the development of reinforced concrete structures – 2.5 t/m3;
- the design of brick and stone, the skip of plaster and tiles -1,8 t/m3.
The next step is to determine the volume of processing.
Loading performance
How many cubic meters or tons per hour is planned to recycle?
The answer to the question is not only to quantitatively “fill” the circuit equipment, but also require the installation capacity of the customer. All this directly concerns the budget that the customer is going to spend.
In the process of operation, it will be necessary to solve the issues of both providing raw materials and marketing of finished products.
At the start, it is necessary to understand how cost-effective and efficient the technology is, where the standard sizes of equipment are rigidly linked to performance. In other words, for processing, for example, up to 20 m3/day should not use large-size raw materials. Invested funds may not pay off for a long time.
And finally, what we plan to get the final product of processing.
Final product
What do we get after processing?
Rebar for delivery in scrap metal and unsorted stone for backfilling of ravines or graded crushed stone — building material for resale, use in construction or manufacturing
Our technologies provide options for obtaining the final product:
Rebar and a stone the size of 0-200mm.
Rebar and unsorted gravel 0-70mm.
Rebar and graded sand 0-5, crushed stone 5-20, 20-40, 40-70mm.
Rebar and graded cube-shaped crushed stone, sand 0-5, 5-20, 20-40, 40-70mm.
It is most economically feasible to design equipment with one production line, where output per one production worker is higher, and the cost of finished products and energy consumption is lower.
Depending on the technical specifications of the customer, we are ready to offer a variety of complete technological lines, where the processing of multi-meter reinforced concrete is a single process to the rubble, purified metal and sand.
We offer the best terms of return on investment.
If you are ready, together with us, to answer all questions, we will quickly calculate the cost of the necessary equipment.
Call: +7 926 074 06 56, +7(831) 295-50-61, write: drobzavod@mail.ru